|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Gas Lid Dress Kit replaces the two factory bolts that secure the gas lid in place with our upgraded bolts and slim design washers.
Colors Available for the washers (All Anodized): Silver, Black, Red, Blue, Purple, Gold, and Orange Currently fits: 2005-2010 Chrysler 300, Dodge Charger, Dodge Challenger, Dodge Magnum
|
License plate dress-up kit for the 2005-Current LX.***
-Chrysler 300 LX
-Dodge Charger LX
-Dodge Challenger LX
-Dodge Magnum LX
The following comes with the kit:
-2 Bolts***
-2 Tapered Washers
***Some 2nd Generation 2011-2014, and 3rd Generation 2015-Current models have self-tapping screws from the factory since FCA decided to cut costs or something and may require either nutserts, backing nuts, or the use of nylon nutserts to fully tighten.
|
This kit replaces the hideous OEM hardware for the hood striker. The following comes with the kit:
-2 Washers*
-2 Anti-Scratch gaskets*
-2 Bolts*
*Hood striker is sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
West Coast Fasteners intends to offer a complete solution for your Mopar. Do you have a clean trunk setup or just want to replace the tired looking OEM hardware?
The following items come with the kit:
-2 Bolts*
-2 Washers*
*The actual striker is NOT included.
|
West Coast Fasteners (WCF) has found a solution to delete the OEM J-Hooks on the far left and right side of the front cowl on your LX! The infamous J-Hooks are not only expensive to replace, but also turn grey or white over time.
The J-hooks don't really serve much of a purpose especially if you have already upgraded your factory front cowl kit to the WCF version.
|
West Coast Fasteners is now offering an option besides those self tapping screws that typically come with radiator panels from 3GKustomz, Trufiber, etc. The dress kit includes: - 4 Bolts
- 4 Washers
- 4 Anti-scratch Gaskets
- 4 Nutserts ***
- Nutsert Tool (Optional) **
***Nutserts must be installed with a nutsert tool.
**The "Grade B" Nutsert Tool comes bare bones with 2 installation adapters which will work with the Mopar related kits and will get the job done. The "Grade A" comes with 4 installation adapters that will cover you for other potential installations along with a tool case, but is not required to complete install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tired of the cheap looking OEM plastic fasteners on your Dodge Magnum's tails? West Coast Fasteners has a solution for you.
The following comes with the kit:
-4 Bolts
-4 Nutserts (Need tool to install)
-4 Anodized Washers
Nutsert Tool Options:
-Grade A (Higher Grade Tool w/ Tool Case and all adapters)
-Grade B (No Case, but all adapters are included for install)
|
The Top Front Bumper Dress Kit replaces the 4 (or 6 for Magnum and Charger) factory clips that sit on top of the front bumper.. The OEM clips are notorious for breaking all of the time and look bad over time. Upgrade to our all metal hardware and be done with it once and for all.
The following comes with the kit:
-4 Washers (8 for Dodge Charger and Magnum)
-4 Bolts (8 for Dodge Charger and Magnum)
-Nut Kit***
|
The door striker dress kit replaces the boring factory hardware with titanium!
[The following comes with the kit]:
-4Titanium Bolts*
*Door strikers are NOT included sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The following comes with the kit:
-6 Bolts
-6 Washers
|
The West Coast Fasteners Front End Dress kit upgrades the following hardware: - Front hood latch mechanism (Qty 2: Bolts and washers)
- Radiator Bracket (Qty 2: Bolts and washers)*
- Horns (Qty 2: Bolts and washers)
Fits 2005-2010 First Gen LX: Chrysler 300, Dodge Magnum, Dodge Charger, Dodge Challenger *There are 3 more radiator support bolts, but you have to remove the front bumper for it to be seen. If you want those as well, feel free to drop us an e-mail. [email protected] All hardware is strictly for off-road use only* West Coast Fasteners always advises to use the proper torque specs when installing your hardware and recommends referencing your factory manuals for reference.*(legal page)
|
The West Coast Fasteners Trunk Liner Kit replaces the 10 plastic clips that hold the interior liner in place. A nutsert tool must be used to complete the install of this kit. You can purchase the tool through us directly or purchase your own.
The kit comes with the following:
-8 Bolts
-8 Washers
-8 Nutserts ***
-Nutsert Tool (Optional) **
***Nutserts must be installed by nutsert tool.
**The "Grade B" Nutsert Tool comes bare bones with 2 installation adapters which will work with the Mopar related kits and will get the job done. The "Grade A" comes with 4 installation adapters that will cover you for other potential installations along with a tool case, but is not required to complete install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Front Bumper support and mount dress kit covers the following: -Front Bumper Support: 8 Bolts and Washers Fits OE support and Razors Edge Motorsports.
|
The Body Dress kit is 100% Made in the USA and upgrades the following bolts on your LX:
-10 Bolts and 10 washers (5 Per side) Washer colors available(All anodized): Silver, Gold, Blue, Red, Black, Orange, and Purple. The body dress kits fit Dodge Chargers, Dodge Magnums, & Chrysler 300. *This item fits First Gen 2005-2010 Trunk Hinges that install with 5 bolts per side. Please confirm that your trunk hinges/hardware matches the photos and hardware count above.
|
Tired of looking at or replacing the cheap plastic push clips that hold in your trunk insulation? West Coast Fasteners has a dress kit that upgrades everything to actual hardware that actually can be tightened and loosened without anything breaking forcing you to go to the dealer to pay for their overpriced plastic.
The following items are included in the dress kit:
-10 Bolts
-10 Washers
-Anti-scratch Gaskets
-10 Nutserts***
-Nutsert Tool (optional)**
Fits 2005-2010 Dodge Charger, Dodge Challenger, and Chrysler 300. Does not work with the Dodge Magnum.
***Nutsert Tool required to complete installation.
**The "Grade B" Nutsert Tool comes bare bones with 2 installation adapters which will work with the Mopar related kits and will get the job done. The "Grade A" comes with 4 installation adapters that will cover you for other potential installations along with a tool case, but is not required to complete install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LX Underhood Panel to Hood Dress Kit replaces the factory plastic clips that hold in the front hood insulation with actual metal hardware! The kit comes with the following: (The quantity of each will vary based on Year and model). -Stainless Bolts
-Anodized Washers
-Nutserts*** ***Nutserts must be installed by Nutsert tool.
|
This is the ultimate hardware upgrade to replace the boring oem factory plastic clips. The following comes with the Front Cowl Dress Kit: -10 Washers
-10 Bolts
-10 Anti-Scratch Gaskets
-10 Nutserts ***
-Nutsert Tool ** (Optional)
***Nutserts must be installed with a nutsert tool. OEM Holes need to be modified to allow clearance for nutsert installation.
The "Grade B" Nutsert Tool comes bare bones with 2 installation adapters which will work with the Mopar related kits and will get the job done. The "Grade A" comes with 4 installation adapters that will cover you for other potential installations along with a tool case, but is not required to complete install.
|
[The following comes with the kit]:
-8 Titanium Bolts*
*Door strikers are NOT included sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Body Dress kit is 100% Made in the USA and upgrades the following bolts on your LX: - Inner Front Fenders (6 Bolts and Washers; 3 per side)
- Front Hood Hinges (8 Bolts and Washers; 4 per side)
Washer colors available: (All anodized) Silver, Gold, Blue, Red, Black, Orange, and Purple. ***Please specify which Year, Make, and model your vehicle is during checkout. (example: 2006 Chrysler 300c SRT8) All hardware is strictly for off-road use only* West Coast Fasteners always advises to use the proper torque specs when installing your hardware and recommends referencing your factory manuals for reference.*(legal page)
|
The Body Dress kit is 100% Made in the USA and upgrades the exposed door bolts on your LX: (The doors DO not have to be removed to install this kit)
1st Generation:
-Front Bolts that attach door hinge to doors
-Rear Bolts that attach door hinge to doors
-Rear Bolts that attach door hinge to body
2nd & 3rd Gen:
-Front Bolts that attach door hinge to doors
-Rear Bolts that attach door hinge to doors
-Rear Bolts that attach door hinge to body
Washer colors available (All anodized): Silver, Gold, Blue, Red, Black, Orange, and Purple. The body dress kits fit Dodge Chargers, Dodge Magnums, & Chrysler 300.
***Please specify which Year, Make, and model your vehicle is during checkout. (example: 2006 Chrysler 300c SRT8)
***The door dress kit DOES NOT fit Dodge Challengers due to the limited amount of hardware they have.
|
West Coast Fasteners is now offering the Fenderwell Dress kit for 1st Gen LX's!
The Fenderwell Dress Kit covers all of exposed hardware and all of the inner portion of the plastic trim as well for the hardcore enthusiast!
Once the OEM clips are uninstalled, the kit installs within minutes with a basic Allen key. No tapping, drilling, or odd tightening from the back side of panels necessary. The following is included in the kit: -36 Bolts
-36 Washers
-Nut Kit
|
|
|
(