|
|
|
|
|
|
|
|
|
|
|
|
|
The license plate dress kit comes with our tapered washers with a stainless or titanium bolt option.
The following comes with the kit:
-2 Bolts
-2 Washers
The item does not include a license plate frame or license plate.
|
West Coast Fasteners has now taken it a step further on the spiked hardware game for VQ's. These spikes replace the nuts that hold your strut in place. If you are running aftermarket suspension, please make sure that the nuts your suspension are using are the OEM thread pitch.***
The entire length of the spike is approximately 1 inch in length so check for clearance on any aftermarket strut bar you may be using. It also has approximately 9/16" of thread length. The LX strut spike kit comes with the following: - 2 Strut Spiked Nuts (Must purchase 3 pairs to cover all 6 strut nuts)
- 2 Anodized Washers (Must purchase 3 pairs to cover all 6 strut nuts)
|
The VQ hood latch has some nice sized hardware so West Coast Fasteners decided to use our thicker washers with a nice angled taper on them for this area of the vehicle.
The following is included in the Hood Latch dress kit:
-3 Bolts
-3 Washers
Hood Latch is NOT included with purchase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The throttle body dress kit for the VQ35 once again uses the slim design washers which fit the VQ like a glove.
-4 Bolts
-4 Washers
***If you have a Throttle Body spacer, please select that information in the drop down box.
|
The small details is what separates one build from the rest. Do not neglect the easy to swap door striker bolts and throw in some West Coast Fasteners titanium versions!
The following comes with the kit:
-4 Bolts
|
The nut kit replaces the 4 factory nuts that attach the front hood hinges to the hood.
The following comes with the kit:
-4 Nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The dress kit comes with the following hardware:
-6 Bolts
-6 washers
***This is for the bolts/washers ONLY. The ARC Intake Box is not included and sold separately.
Anodized finishes available: Silver, Black, Red, Blue, Gold, and Purple
Photos are just used as example for reference on part fitment. Please read the above information carefully.
|
Upgrade your factory strut shock tower / Strut bar nuts in style with these Grade 5 titanium pieces! Titanium is 3.5 times stronger and approximately half the weight of steel.
The following comes with this dress kit:
-6 Nuts
-6 Custom Fit washers (Optional)
|
If you are a lucky owner of a rare Abbey Road Company (ARC) or Final Flag front strut bar, you can appreciate high quality products. Finish the look of your titanium front strut by pairing it with our titanium hardware upgrade. The hardware that attaches the cross bar to the mounting plates are replaced in this kit.
The following hardware is included:
-2 Bolts **
-2 Nuts
-4 Washers (Optional) ***
**We custom cut the bolts to a different length than what is offered by ARC for a more optimal and cleaner overall fit.
***Pictures of the kit installed show the hardware with washers installed.
Titanium Burnt Bolt Color Guide:
-Burnt Classic (Traditional style burn with half of the head burnt)
-Burnt Gold (Top of head is full gold)
-Burnt Blue (Top of head is full blue)
-Burnt Purple (Top of head is full purple)
-Burnt Gunmetal (Top of head is full gunmetal)
What is a WCF Proof Card?
-West Coast Fasteners Proof Cards are hand signed and stamped Certification cards authenticating your rare hardware purchase. Proof Cards can only be purchased upon checkout, so add it now. What better way is there than to encapsulate your masterpiece by separating yourself from the rest with authentication and certification?
The following items are covered in WCF Proof Cards:
-Production Date
-Bolt Finish / Bolt Type
-Notes if any
-Signature
-Authenticity Stamp
-Protective Sleeve or Plastic Hard Case (5mm thick)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LARGE front seat bolts are fully exposed and when given the West Coast Fasteners treatment, the interior is taken up a notch.
The following come with the Seat dress kit: (Order Quantity 2 if you want both seats)
-4 Bolts
-4 Washers
|
The West Coast Fasteners Front Bumper Top Dress kit replaces the 6 factory plastic clips with actual hardware!
The following comes with the kit: - 6 Washers
- 6 Bolts
- Nut Kit***
***Part of the nut kit must be installed with the aid of a Nutsert tool.
Nutsert Tool Options:
-Grade A (Higher Grade Tool w/ Tool Case and all adapters)
-Grade B (No Case, but all adapters are included for install)
|
Finish the look of your NRG strut bar by pairing it with our titanium hardware upgrade. The bolts and nuts that connect the cross bar to the mounting plates are replaced with this kit. Add in the finishing washers for a complete look..
The following hardware is included:
2 Bolts
2 Nuts
4 Finishing Washers (Optional)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
West Coast Fasteners wanted to address a section of the engine that seems to always be overlooked by other companies so we created the Slim design washers to give the VQ coil packs a nice and tailored kit. The washers are high grade aluminum with the edge of the washer starting at the base and finishing all the way up to the head of the bolt. The finish is completely anodized and comes in silver, black, red, blue, gold, Purple, & orange. We also took it a step further and created a tapering washer to fill the two mount points below the coil packs on both sides of the VQ engine. Some people run the coil packs open and others run coil pack covers. These washers will work with either setup you decide to run on your VQ.
|
West Coast Fasteners has been very excited to release this particular kit after seeing a huge gap in quality on some of the backyard special kits being sold on facebook. The aluminum we use is aircraft quality, thick, and has an anodized finish to improve longevity. We also offer polish and chrome finishes, but rest assured we offer the highest quality kit when it comes to the VQ market.
The dress kit covers the following:
-Inner Fenders
-Core Support Near Headlights
-Headlights
|
You have your entire engine bay decked out, but are still running the factory clips? West Coast Fasteners has a solution for your infiniti G35.
[The following comes with the kit]:
-Bolts
-Washers
-Nutserts & Spare Nuts*
*Parts of the kit require a nutsert tool for install.
**The actual cowl and covers are NOT included with purchase and sold separately.
Nutsert Tool Options:
-Grade A (Higher Grade Tool w/ Tool Case and all adapters)
-Grade B (No Case, but all adapters are included for install)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
West Coast Fasteners is very excited to dress the plenums on the VQ35DE! A lot of the kits that have been released have awkward fitment due to using a one size fits all approach. We custom tailored a mix of two styles of washers to create a perfect fitting kit! The West Coast Fasteners dress kit comes with the following: -24 Bolts ...
-24 Washers*** -(7 Washers are the flatter style to fill in the 6 middle bolts that sit in the middle of the plenum)***
-3 Washers Cover unused holes on the plenum***
-3 Washers Cover the engine harness & evap system brackets*** |
Complete the look of your engine bay, by using the correct fitting hardware on your VQ valve covers. The West Coast Fasteners tapered design fits the OEM location perfectly in diameter and gives your custom engine bay a professional touch that is unparalleled.
Bolts are available in: Stainless steeland Burnt titanium.
Washers are available in: Machine finish, Black, Red, Blue, Gold, Purple
Hardware that is included in this kit:
Washers (Quantity 20)
Bolts (Quantity 20)
****Bolt design will vary from OEM Taper. Off-road/show use only.
|
The West Coast Fasteners Cosworth Intake Manifold Dress Kit takes an already beautiful aftermarket part and brings it to the next level with our slim line washers. The anodized aluminum hugs each bolt all the way up to the tip of the head for a completely custom finish. The following items come with the dress kit: -21 anodized washers (3 washers for the front of the manifold, 9 washers for each manifold cap)*
*These bolts do not cover the 4 back/center bolts of the manifold since those do not fit any sort of our anodized washers.
The kit is built with specifications for those with the Cosworth Manifold only. If you have also added other spacers etc. in addition to the Cosworth manifold, the specifications would be different and product availability may vary.
***The optional titanium hardware upgrade does not replace all of the irregular sized bolts, but does include 20 bolts that are commonly stocked.
|
|
|
|
|
|
|
|
|
|
|
|
|
The VQ timing cover is a car enthusiast's dream when it comes to modifying it to really make it pop due to the amount of hardware it holds! The West Coast Fastener's Bolt Dress Kit covers the following: - Timing Cover
- Cam Covers
- Water Pump Cover
- Chain Tensioning Cover
- VTC
The photos are for reference only. The 5 locations above are covered and the kit ONLY includes Bolts and Washers and not the actual engine parts.
|
|
|
(
