|
|
|
|
|
|
|
|
|
|
|
|
|
Do you have a firewall cover attached to your cross strut bar/strut bar with some self-tapping screws? Upgrade to the West Coast Fasteners solution with actual nutserts, bolts, and washers.
The following comes with the kit:
-4 or 6 Bolts;
-4 or 6 Washers;
-4 or 6 Nutserts; and
-4 or 6 anti-scratch gaskets.
|
This bolt and washer combination replaces the hardware on the Water Tank Reservoir Bottle
The following comes with the kit:
-1 Bolt; and
-1 Washer.
|
A lot Chrylser/Dodge customers run some sort of aftermarket intake box and are left with the lonesome OEM bolt that sits on the intake bracket/Radiator Support that is a total eye sore. This dress kit replaces the less than desirable OEM bolt with an allen bolt and tapered aluminum washer.
The following comes with the kit:
-1 bolt *
-1 washer
*The supplied bolt from us is shortened for improved fitment and unnecessary length that the factory bolt provides.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The following comes with the kit:
-2 Nuts; and
-2 Washers.
|
This kit replaces the hideous OEM hardware for the hood striker. The following comes with the kit:
-2 Washers*
-2 Anti-Scratch gaskets*
-2 Bolts*
*Hood striker is sold separately.
|
This bolt and washer combination replaces the hardware on the front hood latch.
The following comes with the kit:
-2 Bolts; and
-2 Washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The coolant tank dress kit is pretty self explanatory. People spend so much time painting, hydropipping, and even fiberglassing them for a different shape. However, all of that work doesn't come full circle until you match it with some beautiful hardware. The coolant dress kit covers the following: - 2 Bolts ***
- 2 Washers
***The coolant tank threading is known to be stubborn at times, don't be alarmed as we have matched the thread pitch as close as we could to make the install as easy as possible. If extremely necessary, it may require a tap to clear the way.
|
The Water Neck bolts are fully exposed on Hemi Hellcat engines and are Bolt Dress Kit is a great compliment to the upgraded Billet Technology (BT) water neck. This bolt dress kit also fits OEM applications as well.
The dress kit comes with the following (BT Water Neck is NOT included and sold separately):
-2 Bolts*
-2 Washers*
*The BT Thermostat Housing/Water Neck is NOT included and is just shown for display purposes only.
Titanium Burnt Bolt Color Guide:
-Burnt Classic (Traditional style burn with half of the head burnt)
-Burnt Gold (Top of head is full gold)
-Burnt Blue (Top of head is full blue)
-Burnt Purple (Top of head is full purple)
-Burnt Gunmetal (Top of head is full gunmetal)
What is a WCF Proof Card?
-West Coast Fasteners Proof Cards are hand signed and stamped Certification cards authenticating your rare hardware purchase. What better way is there than to encapsulate your masterpiece by separating yourself from the rest with authentication and certification?
|
The Throttle Body and Intake Bracket dress kit cleans up the nose of the engine nicely. This throttle body kit covers the following: - 4 Bolts *****(Titanium upgrade option is ONLY available for 1st Gen 2005-2010 and Hellcat Engine)*****
- 4 Washers
Washer Colors Available: Aluminum, Black, Blue, Gold, Purple, Red, and Orange The optional Allen key is provided just as an aid during install. A torque wrench is recommended for final tightening with factory torque specs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Do you have the Billet Technology UniStruts and would like to add a little personal touch? West Coast Fasteners has an anodized washer upgrade in the following colors:
Silver, Black, Red, Blue, Purple, Gold, and Orange
The following is included in the dress kit:
-6 Aluminum Washers (Only 3 are needed for Hellcats)*
*To complete the Hellcat look, West Coast Fasteners recommends the Coolant Tank Secondary Reservoir kit that contains 3 Titanium Nuts and 3 Washers.
|
The LX cross Strut Bar Dress Kit replaces the 4 bolts (2 on driver side & 2 on passenger side)that attach the cross strut bar to the car.
|
This Hellcat dress kit replaces the six nuts (three per side) that hold down the Strut/Shock tower nuts on both the driver and passenger side. The nuts are threaded to fit the OEM/Factory thread pitch.
The following comes with the kit:
-6 Titanium Nuts
-6 Washers
Picture shows the nuts/washers installed on the Billet Technology Unistruts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
West Coast Fasteners continues to push the envelope by retaining tensile strength with style. The LX Front Control arm nuts are located in the front section of the fenderwells next to the ground behind the fusebox cover & the coolant tank. The following comes with the kit:
-2 Titanium Lock Nuts
-2 Aluminum Washers
*The titanium cannot be burnt in this location due to the lock nut style being prone to melting during the heat treatment,
|
This is the ultimate hardware upgrade to replace the boring oem factory plastic clips. The following comes with the Front Cowl Dress Kit: -10 Washers
-10 Bolts
-10 Anti-Scratch Gaskets
-10 Nutserts ***
-Nutsert Tool ** (Optional)
***Nutserts must be installed with a nutsert tool. OEM Holes need to be modified to allow clearance for nutsert installation.
The "Grade B" Nutsert Tool comes bare bones with 2 installation adapters which will work with the Mopar related kits and will get the job done. The "Grade A" comes with 4 installation adapters that will cover you for other potential installations along with a tool case, but is not required to complete install.
|
The following comes with the kit:
-12 Bolts
-12 Washers
-12 Nutserts (Must use nutsert tool for installation*)
*OEM Holes need to be modified to allow clearance for nutsert installation.
***MAKE SURE TO CONFIRM that your front cowl has 12 fasteners that need to be replaced similar to the one shown in the photo.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The coil pack kit comes with the following: 16 Bolts *
16 Washers
*If the BT Coil Pack Covers are also selected, then we will include 4 longer bolts in place of 4 bolts to accommodate the covers.
Titanium Burnt Bolt Color Guide:
-Burnt Classic (Traditional style burn with half of the head burnt)
-Burnt Gold (Top of head is full gold)
-Burnt Blue (Top of head is full blue)
-Burnt Purple (Top of head is full purple)
-Burnt Gunmetal (Top of head is full gunmetal)
|
The Body Dress kit is 100% Made in the USA and upgrades the following bolts on your LX: - Inner Front Fenders (6 Bolts and Washers; 3 per side)
- Front Hood Hinges (8 Bolts and Washers; 4 per side)
Washer colors available: (All anodized) Silver, Gold, Blue, Red, Black, Orange, and Purple. ***Please specify which Year, Make, and model your vehicle is during checkout. (example: 2006 Chrysler 300c SRT8) All hardware is strictly for off-road use only* West Coast Fasteners always advises to use the proper torque specs when installing your hardware and recommends referencing your factory manuals for reference.*(legal page)
|
All sales are final with no refunds. Orders are all custom, bespoke, and made to order with funds being used for materials, setup, etc.
Lead times will vary and not guaranteed so please plan ahead.
[The following comes with the kit]:
-30-35 Bolts; and
-30-35 Custom Fit Washers.
(Supercharger Lid is NOT included and is shown for display purposes only)
The Hellcat Supercharger Lid shown has been custom copper plated by @WestCoastCoatings and has the front hole covered with a bolt and washer for show purposes only. This item only provides the bolts and washers and does not include plating or the actual supercharger lid.
|
|
|
(