Overnight Processing Surcharge (Must be pre-approved)
The overnight order processing surcharge will vary based on and not limited to material, quantity, current lead times, etc. Please consult with a West Coast Fasteners sales representative to pre-approve and guide you in proper surcharge selection.*
*West Coast Fasteners reserves the right to deny this request depending on circumstances.
Shipping Adjustment in $1 USD Increments
This link is available for international customers that have been quoted shipping costs via e-mail. Add each item to your cart as follows:
-If you were quoted $15 USD for Shipping add Quantity 15 of this item to your cart for checkout.
-If you were quoted $25 USD for shipping, add Quantity 25 of this item to your cart for checkout.
Magpul QD Sling Attachment M-Lok Bolt Dress Kit
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
Do you already own the Magpul Industries Sling Attachment, but would like to add some color to it or even fully upgrade to some Grade 5 Titanium Screws? West Coast Fasteners has you covered.
[The following comes with this Bolt Dress Kit]:
- 2 Bolts
- 2 Lock Nuts (M-Lok style)
- The Magpul QD Sling Attachment is an optional Upgrade otherwise it is just the Bolt Kit Only
The picture shows the hardware installed on the Magpul Sling Attachment which is sold separately unless you opt for it to be included in the drop down. This item ONLY includes the Bolt Dress Kit which is defined above.
Magpul M-Lok Rail Section Aluminum Bolt Dress Kit (Bolts Only)
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions.]
[The following comes with the kit depending on how many slots your Magpul Indsustries Rails have]:
-3 Slots = 2 Bolts, 2 nuts
-5 Slots = 2 Bolts, 2 nuts
-7 Slots = 2 Bolts, 2 nuts
-9 Slots = 2 Bolts, 2 nuts
-11 Slots = 3 Bolts, 3 nuts
The Magpul M-Lock Rail Section(s) are sold separately. The photo just shows the bolts installed for sample purposes only. This Bolt Dress Kit only include the bolts as shown above depending on the number of slots chosen.
Magpul M-Lok Rail Section Titanium Bolt Dress Kit (Bolts Only)
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
[The following comes with the kit depending on how many slots your Magpul Indsustries Rails have]:
-3 Slots = 2 Ti Bolts, 2 nuts
-5 Slots = 2 Ti Bolts, 2 nuts
-7 Slots = 2 Ti Bolts, 2 nuts
-9 Slots = 2 Ti Bolts, 2 nuts
-11 Slots = 3 Ti Bolts, 3 nuts
The Magpul M-Lock Rail Section(s) are sold separately. The photo just shows the bolts installed for sample purposes only. This Bolt Dress Kit only include the bolts as shown above depending on the number of slots chosen. Firearm is NOT included with the sale.
Benchmade Mini Griptilian Folder Titanium Bolt Dress Kit (No Knife)
Do you already have a sick Benchmade Mini Griptilian FRN Knife and want to add some personality to it? This is for the BOLTS ONLY and DOES NOT INCLUDE the knife. You will install these on your own knife. We are not liable for any damage caused to the user's knife.
[Fitment guide]:
These 3 titanium bolts are for only the clip of the Benchmade Mini Griptilian FRN and does not fit the new G-10 Mini Griptilians or the full-size Griptilians.
Once again there is no knife included and just 3 Titanium bolts included.
Magpul M-Lok AFG Bolt Dress Kit
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
Do you already own the Magpul Industries M-Lok AFG, but would like to add some color to it or even fully upgrade to some Grade 5 Titanium Screws? West Coast Fasteners has you covered.
[The following comes with this Bolt Dress Kit]:
- 2 Bolts
- 2 Washers
- 2 Lock Nuts (M-Lok style)
- 2 Gaskets (Cut to fit if desired to make the AFG fit even more snug than factory if needed)
- Magpul M-Lok AFG is an OPTIONAL Upgrade otherwise it is just the Bolt Kit Only.
The picture shows the hardware installed on the Magpul M-Lok AFG which is sold separately unless you opt for it to be included in the drop down. This item ONLY includes the Bolt Dress Kit which is defined above.
Recover Tactical 20/20 & 20/20N Stabilizer Kit/Brace Bolt Dress Kit (Bolts Only)
Do you own a Recover Tactical 20/20 or 20/20n Stabilizer Kit/Brace and want to customize the look of it a bit more to match the rest of your theme or to add a bit more spice? West Coast Fasteners has you covered to bring the exposed Bolts and Nut up to par with what you are looking for.
[The following comes with the bolt dress kit]:
- 3 Bolts
- 1 Flat Bolt
- that installs on the Frame near the trigger guard that tightens to the nut to keep tension
- 2 Bolts (1 per side)
- that attach to where the Picatinny Slide Rails go. It also works for the UR20 if you purchased that upgrade as well.
- 1 Nut
- The Stabilizer/Brace is NOT INCLUDED and sold SEPARATELY
This kit was fitted on the Glock Applications, but may fit other models since this kit was duplicated from Recover Tactical's Spare Hardware Kit and the ones we run on our glocks. We recommend reaching out to Recover Tactical directly to see if your specific model has the same hardware.
Photos shown have the Titanium Screws installed in the Burnt Classic Finish (Half-burn).
Benchmade 940/940-1 Osborne Titanium Bolt Dress Kit (No Knife)
Do you already have a sick Benchmade 940/940-1 Knife and want to take it to the next level? West Coast Fasteners has you covered. This is for the BOLTS ONLY and DOES NOT INCLUDE the knife. You will install these on your own knife. We are not liable for any damage caused to the user's knife.
[Fitment guide]:
-Purple Anodized (Will only fit the Green Handle 940 with the purple insert)
-Silver, Burnt Classic, Blue Anodized, & Bronze Anodized will fit the 940-1 Model with the Carbon Fiber Handles and Blue Posts/Spacers
[Kit Description]:
-The 940 kit includes 9 Bolts (4 Body Screws, 3 Clip Screws, & 2 Scale Screws)
-The 940-1 kit includes 11 bolts (3 Clip Screws & 8 Scale Screws)
Vara Safety Reach Car Mount Bolt Dress Kit (Hardware Only)
Do you own the Vara Safety Reach 2 Car Mount and want to upgrade the hardware so there is contrast or to match your interior? The screws and nuts are also upgraded to Grade 5 Titanium.
[The following comes with the kit]:
-2 Titanium Nuts
-2 Titanium Bolts
-4 Finishing Washers
The Vara Safety Reach, Reach2, Reach2S, and Car Mount Adapter are sold separately. This kit is for what is listed above only.
Benchmade 3350 Mini Infidel Titanium Bolt Dress Kit (No Knife)
Do you already have a sick Benchmade 3350 Mini Infidel Knife and want to add some personality to it? This is for the BOLTS ONLY and DOES NOT INCLUDE the knife. You will install these on your own knife. We are not liable for any damage caused to the user's knife.
[Fitment guide]:
These 14 titanium bolts (12 Scale & 2 Clip) are for the Benchmade 3350 Mini Infidel.
Once again there is no knife included and just 3 Titanium bolts included.
CAA Gearup MCK 1 & 2 Roni Bolt Dress Kit (Hardware Only)
Do you own a CAA MCK 1 or CAA MCK 2 Micro Roni for your pistol and would like to add some more customized flare to it? West Coast Fasteners has a Bolt Dress Kit for you in Titanium and Aluminum that will take your system to the next level.
[The following comes with the kit]: (CAA MCK 1 or 2 Sold Separately; Hardware listed below only)
-13 Bolts and 5 Nuts
According to CAA Gear Up. This bolt dress kit will fit the MCK 1 and MCK 2, but we recommend checking with them if you are unsure. Pictures show the bolts installed on a MCK 2 for a Glock. The pictures in the item listing currently show the CAA MCK2 for the Glock Chassis.
(
